I put my finished Merry May top for MAGAM (only a couple of weeks late!) on Instagram
earlier and said I wouldn't be wearing it outside. Why?
I said earlier in the month that I was having massive
problems with the darts. They just wouldn't lie nicely. I had them in and out
and Lyn helped me fix them as best they could be fixed. There were a couple of
problems with them, relating to fabric choice and to pattern. This was the same
self drafted pattern I made for my last top, the checked one with the tartan
trim. However, this fabric was very slippery and wiggly and I struggled with it
(sorry, Rory - I've let you down!). It didn't like the darts, which kept
twisting, even in Lyn's hands. This was made worse by the fact that these darts
were French darts so very much on the bias. The original darts were folded upwards
and this just didn't work in this fabric - they wanted to lie downwards, follow
gravity I suppose! When I then let them fall, there was insufficient at the
sides to catch in the seam and these were large darts so, on Lyn's recommendation,
the dart was trimmed to about 1cm using the overlocker. Lyn did the trimming as
I was scared!
I took the top to where I could and sewed up the sides again
and overlocked the edges.
In my last top, I didn't manage to apply self fabric bias
but in fact the commercial tartan tape was a much better option. In this top, I
did manage to make and apply my own bias tape. So that's one positive thing!
The fabric frayed tremendously and this proved to be big
problem with all the sewing and ripping out. I ended up having to deepen the
front of the neck and the armholes too. There was no seam allowance. In future,
I think I would have a seam allowance even if I then cut off, as that would
give me a bit of leeway.
But why won't I wear it outside? It's comfortable, doesn't
fit too badly BUT see this photo - a pull has occurred from top to the bottom
of the fabric on the right side, presumably as the darts were being
manipulated. I can't do anything about it, I'm afraid.
Lessons learned
- · My pattern needs some tweaks, as my figure changes a bit
- · Fabric choice is crucial - well I knew that but still haven't put it into practice!! During making, the darts were uneven from side to side despite cutting on one thickness of fabric from a double width pattern.
- · Overworking and mishandling fabric is a disaster - and leads to stretching, excess fraying and to fabric pulls and ultimately an unsatisfactory garment. The bias tape is not lying nicely, either, which is very sad as my last top did lie nicely.
I knew about the pull but decided to finish the top, anyway.
I could wear it under a jacket or cardigan provided I didn't take them off! I
am making another top (commercial pattern) with the same fabric and I've
already had fit issues but my experience here will help, I hope. This second
top has bias tape on the inside so I've bought some silky commercial bias tape.
I bought navy and red but the navy isn't dark enough so I'll probably use the
red. I don't have enough fabric left, I don't think, anyway, to make my own
self fabric bias tape.
Over the next few weeks/months (however long it takes) I
will be posting about my search for the 'perfect' top (not couture, though).
You know this will take a while as I am not one to churn out lots of garments.
Comments are invited, please! Including, please, what fabric
do you think would be best for this pattern? TIA. Hope the rest of your weekend goes well. I'm
planning to do a bit of sewing.
MAGAM is the Make a Garment a Month Challenge hosted by Sarah Liz on Facebook and now on Instagram. Thank you for your hard work, Sarah Liz
