Monday 9 October 2017

Grainline Morris blazer - 'finished' and abandoned

I can't remember if I posted anything about the Grainline Morris blazer I was making. I haven't been posting for ages and my memory isn't that good! I started this blazer months ago, perhaps a full year ago or more!  So to briefly recap:
  • I followed instructions to do a FBA. This meant that my final blazer would have a dart whereas the original did not. Grainline is for a smaller cup size
  • I made up a toile but the fabric wasn't suitable so this wasn't very helpful. However, I needed a bit extra in the biceps area.
  • I lengthened the jacket length (though it turned out by too much)
  • I thought I had found suitable fabric and started to make the blazer. However the armholes and sleeves were far from right. I modified these as per tutor advice. I added to side seams under arms on bodice and sleeve and the sleeve cap was narrowed. I was fitted with it on.
  • Using the alterations suggested,  I started to make the blazer again and this time a bit shorter though still longer than the original. The fit wasn't bad, I thought.

I quickly realised I had a few problems. I loved the colour of my fabric but the fabric itself was spongy and really quite nasty,  clicking too readily - and clinging so that it wouldn't be possible to wear it over any kind of sleeve. I originally thought it was a ponte but it's actually a rather cheap scuba. It was difficult though not impossible to press and neither sewing machine (despite trying different needles etc) nor overlocker liked it.

I had to make up new facings because of my adjustments but that wasn't a great problem though I could certainly improve on what I achieved, particularly at the junction of hem and fronts.

So today I was ready to complete the blazer. The outer part was sewn and sleeves were set in.  Facings were attached apart from sleeve facings which I did today. I didn't like it. Colour lovely but the jacket dragged as I put it on to try it. I feel it needs a lining. That's the fabric rather than the style though I think.

Nevertheless I decided to finish but I made a mistake. The original instructions have you understitch the hem only. The front and collar are pressed so that the junction with the facing is at the edge and then the jacket is topstitched. As my fabric was so springy I decided to understitch the lot. I trimmed and graded all the seams and understitched. However I forgot to change the understitching to the other side at the collar break. I didn't even realise until it was pointed out. As it was going to be difficult to remove the stitching and as there were already a couple of nasty clicks very visible on the collar, I quickly decided this was another toile! You may see this on the photos. I'm not taking any specifically to show this.

I did some quick and dirty topstitching which certainly wouldn't have been satisfactory on a proper garment. I was using a class machine and I'm sure the wrong needle. My stitching was short,  long,  skipping. A mess.

I ‘finished’ the jacket.
But:
  • Wrong fabric
  • Difficult to judge fit as clings to shoulder area and sits lopsided
  • I need to improve how facings are attached to jacket at free edge.
  • i think its too wide at shoulders
  • I need to follow instructions or get my modification to instructions correct!

As well as quick and dirty topstitching, the jacket has quick and dirty pressing!

Too wide at the shoulders is the least of the problems



The blazer might be satisfactory in a different fabric. It needs more body. It's for stable stretch.  I'm thinking maybe boiled wool. Anyway, this is a summer jacket really. I'm not thinking of redoing it for now as I have a host of other projects on the go all of which are now more urgent than this one -  posts to come. Briefly: Chanel-type jacket quilting (for Saturday coming), costumes x4 for murder mystery weekend and silk dress for Helen for birthday all by end of November. Wish me luck! This jacket is back at the end of the queue; there are other UFOs in it too.

2 comments:

  1. Hi Anne. I think you have done really well. You can do a quick fix with shoulders if there is a CB seam you can take in to reduce that. Cloth is nice for the blazer if you want soft casual look. But did you full fuse fronts with right weight. Then double fuse at shoulders hem and armholes. At back I either fuse a buggy or use a bias cut buggy. I'm not sure about topstitching. It seams to be dragging cloth. Maybe no topstitching. This jacket would look great in twill, worsted suiting, tweed, denim and ponte di Roma. All producing a very different look. You have done really well just a few tweaks and it will be fab. Rory

    ReplyDelete
    Replies
    1. Thanks, Rory. I'll let you see it! Yes CB seam. Fusing - no. I don't know what you mean by a bias cut buggy, sorry. This topstitching was BAD - I had given up by that time! Yes, I'm thinking ponte di roma (which I originally thought this was!) or boiled wool.

      Delete

Thank you for taking the time to visit my blog. Please leave a comment. I welcome each and every one. I value criticism (constructive of course! ), love hints and tips and would appreciate suggestions for future direction.

How Do You Read Blogs?

It's a while since I've posted a blog,  lots of reasons. I'm thinking of starting again. However,  I used to read the blogs I fo...